Skip to content
Bright shaker kitchen in a detached stone house, sage units and pale worktops, morning sun through a wide window over the sink

Kitchen Fitting Across Manchester, Sheffield And Leeds, With The Pipes, Gas And Heating Planned First

We plan the sink, appliances, gas hob and any radiator in the way before a unit goes in, so no plinth has to come off later for a leak. We fit kitchens across Manchester, Sheffield and Leeds.

  • Gas Safe Register mark, First Point gas engineer registration 930763
  • F-Gas Register mark, First Point registration FGAS3028681
  • Heat Geek trained
  • Stiebel Eltron certified installer
  • Which? Trusted Trader
Finance through Ideal4Finance

Spread The Cost Of Your Install

  • APR (fixed) 12.9%
  • Loans from £1 to £30,000
  • Finance over 12 to 120 months
  • Ask for finance with your quote
  • We agree any deposit with you before you apply

Representative example: £8,000 purchase, £2,000 deposit, £6,000 credit over 48 months at 12.9% APR (fixed). 48 monthly payments of £160.67. Total repayable £7,712.03. Total cost £9,712.03.

First Point Plumbing & Heating is an Introducer Appointed Representative of Ideal Sales Solutions Ltd, t/a Ideal4Finance. Ideal Sales Solutions Ltd is a credit broker and not a lender (FRN 703401). Finance available subject to status. There are risks involved in taking out a loan and you should ensure you can make all payments on time and in full; failure to do so can lead to financial difficulties and have a negative impact on your credit score.

Illustration of a sunlit kitchen in a detached gritstone house, cream in-frame units and a Belfast sink under a mullioned window, the garden and hills outside Illustration of a sunlit kitchen in a detached gritstone house, cream in-frame units and a Belfast sink under a mullioned window, the garden and hills outside

A Kitchen Can Look Finished On Day One And Leak Under The Units For Months

The trouble in a new kitchen sits where you can’t see it, behind the plinths and under the sink.

A kitchen company can supply and fit the units and leave the water, waste and gas to whoever you can find. The units go up, the plumbing gets squeezed in around them, and any shortcut ends up behind a plinth you won’t take off until the floor starts to lift.

What that looks like a year on:

  • A dishwasher waste with no proper fall, dripping into the chipboard under the sink
  • The boiler cupboard sitting where your new larder unit belongs
  • A radiator on the one wall the new units need
  • A new tap that runs at half the flow of the old one

Each of those is plumbing or heating work, the trade our founder has spent ten years in. We plan the services behind your kitchen with the layout and price them as one job.

Kitchen Fitting Backed By A Two-Year Guarantee On Our Work

Your kitchen’s plumbing, gas and heating stay with one Gas Safe registered company, so the work behind the units waits on no other trade.

  • Gas Safe registered 930763, so the gas side of your kitchen stays with us

  • Boiler relocation and radiator changes priced inside the kitchen quote

  • Pipe runs sized for your new taps, so they keep their flow

  • A 2-year workmanship guarantee on our work, running alongside the manufacturer warranties

  • Our own engineers, with a same-week return when something needs adjusting

Before anything is fitted, we visit, measure the room and trace the supply, drainage, gas and heating routes behind it. You get one written quote for that work, with the start date, and one company to ring if anything needs a look. We also have pages on kitchen fitting in New Mills and kitchen fitting in the High Peak.

Three First Point engineers, backs to camera, setting a bank of copper pipes into clips along a stone and blockwork wall beneath new timber joists Three First Point engineers, backs to camera, setting a bank of copper pipes into clips along a stone and blockwork wall beneath new timber joists

Behind The Units, Service By Service

The services we plan and fit before the first unit goes on the wall.

  • Water Hot feeds in red, cold feeds in blue.
  • Waste Waste pipes laid to fall to the drain.
  • Gas The supply to the hob and the boiler.
  • Heating The boiler, radiators and any underfloor loops.
Sink feeds Appliances Waste Hob supply Boiler Radiator Underfloor
  1. Water Step 1 of 7

    Hot And Cold Feeds To The Sink

    Feeds run to the sink, sized to the taps you chose so the flow holds.

    Illustration of hot and cold copper feeds with quarter-turn isolation valves under a kitchen sink
  2. Water Step 2 of 7

    Appliance Feeds, Or A Move To The Utility

    The dishwasher and washing machine get their own feeds and valves, or move to a utility room with a new feed and waste.

    Illustration of a utility room with a washing machine and dryer in painted units, the feeds and valves on the wall
  3. Waste Step 3 of 7

    Waste That Drains

    Waste pipes go in laid to fall towards the drain, so water leaves the sink and the appliances and doesn’t sit in the pipe.

    Illustration of a white waste trap under a kitchen sink with the dishwasher hose on its spigot
  4. Gas Step 4 of 7

    Gas To The Hob

    A Gas Safe registered engineer runs the supply to the hob, connects it and tests it.

    Illustration of a rigid gas supply and its isolation valve inside a hob base unit
  5. Heating Step 5 of 7

    The Boiler, Where The Layout Wants It

    If the boiler sits where your new units need to go, we move it in the same job.

    Illustration of a combi boiler housed in a tall painted kitchen unit, its flue straight out through the wall
  6. Heating Step 6 of 7

    Heat That Suits The New Room

    Radiators get moved or swapped to fit the new walls, or underfloor heating goes in where the floor allows.

    Illustration of underfloor heating loops on insulation boards in a kitchen extension, the manifold on the wall
  7. Finish Step 7 of 7

    Units, Worktops And Appliances Fitted

    The units and worktops go in over the new services, and the sink, taps, appliances and hob are connected and tested.

    Illustration of a cream in-frame kitchen with a Belfast sink and a range cooker

Six Services, One Quote

All six go on one written price, so no separate plumber or gas engineer bills you later.

What’s Included In Our Kitchen Fitting, Step By Step

One quote covers the work behind your kitchen, from the first measure to the hob tested.

  1. Visit and Measure

    An engineer measures the room and maps where the pipes and gas run today.

    Illustration of an engineer in plain dark workwear measuring a dated kitchen with a laser measure, the homeowner beside him
  2. Written Quote

    You get the service changes, the price and the start date in writing before you commit.

    Illustration of a written quote and a floor plan sketch on a kitchen table in the sun
  3. Strip-out

    We disconnect and cap the old sink, appliances and hob before the old units come out.

    Illustration of a stripped-out kitchen with bare walls, capped copper pipes and dust sheets on the floor
  4. First Fix

    New water, waste and gas runs go in, and the boiler or radiators move if the plan needs it.

    Illustration of first fix in a kitchen, new copper feeds and waste runs clipped to bare plaster
  5. The Fit

    Once the units are in place, we connect the sink, taps, appliances and hob and test them.

    Illustration of an engineer connecting a sink tap from inside a new base unit
  6. Handover

    We leave the room clean and confirm your 2-year workmanship guarantee in writing.

    Illustration of a finished kitchen, clean and bright, the homeowner smiling at the island
Illustration of an engineer in plain dark workwear measuring a dated kitchen with a laser measure, the homeowner beside him Illustration of a written quote and a floor plan sketch on a kitchen table in the sun Illustration of a stripped-out kitchen with bare walls, capped copper pipes and dust sheets on the floor Illustration of first fix in a kitchen, new copper feeds and waste runs clipped to bare plaster Illustration of an engineer connecting a sink tap from inside a new base unit Illustration of a finished kitchen, clean and bright, the homeowner smiling at the island

Questions Worth Asking Any Kitchen Fitter Before They Start

Distance, the boiler, the gas and the days without a kitchen.

Navy shaker kitchen island with a gas hob and pendant lights, bifold doors open to a sunny garden
  • Will a small company turn up and stand behind its work?

    Yes. If anything needs a look after the fit, ring our office and we’re back with you the same week.

  • Does the boiler have to stay where it is?

    No. Moving a boiler is part of our boiler work, so a new spot in a cupboard, the loft or on another wall can sit inside the kitchen quote once we’ve checked it at the visit.

  • Who connects the gas hob?

    Our own Gas Safe registered engineers (registration 930763), so the gas work stays with one registered company from the first run to the test.

  • How long will we be without a kitchen?

    Your quote sets the start date and the number of days the room is out of action, so you can plan meals around it before you agree.

Common Questions About Kitchen Fitting

Yes. We work on kitchens across New Mills, Glossop, Hayfield, Marple, Disley, Whaley Bridge, Chapel-en-le-Frith and Buxton, as well as Stockport.

If your boiler is due for replacement, the refit is the easiest time to do it, with the wall open and the units off. We fit Vaillant and Main Eco Tech boilers, and our boiler installation page explains how that work runs.

Yes. We run new feeds and a waste to the utility room or under the stairs, and we check the waste route at the visit.

Our office books your visit and your start date and stays your point of contact, while the same engineers work on the room from strip-out to handover.

Tell Us About The Kitchen

What you’re planning, the house it’s going in and the best way to reach you. Our office takes it from there.

Reviews From Our Customers