Skip to content
MVHR installation for Chinley homes: a white Mitsubishi Electric Lossnay MVHR unit on a raised platform in a sunny boarded loft, with insulated ducts to the gable wall and down to the rooms and its condensate drain running through a trap

MVHR Installation In Chinley, Designed In The Same Survey As Your Heat Pump

Moving off oil can bring new windows and insulation along with the new heating. We design the ventilation in the same survey, so the ducts and the heating pipes get their routes before either goes in.

  • Gas Safe Register mark, First Point gas engineer registration 930763
  • F-Gas Register mark, First Point registration FGAS3028681
  • Heat Geek trained
  • Stiebel Eltron certified installer
  • Which? Trusted Trader
Finance through Ideal4Finance

Spread The Cost Of Your Install

  • APR (fixed) 12.9%
  • Loans from £1 to £30,000
  • Finance over 12 to 120 months
  • Ask for finance with your quote
  • We agree any deposit with you before you apply

Representative example: £8,000 purchase, £2,000 deposit, £6,000 credit over 48 months at 12.9% APR (fixed). 48 monthly payments of £160.67. Total repayable £7,712.03. Total cost £9,712.03.

First Point Plumbing & Heating is an Introducer Appointed Representative of Ideal Sales Solutions Ltd, t/a Ideal4Finance. Ideal Sales Solutions Ltd is a credit broker and not a lender (FRN 703401). Finance available subject to status. There are risks involved in taking out a loan and you should ensure you can make all payments on time and in full; failure to do so can lead to financial difficulties and have a negative impact on your credit score.

MVHR installation for Chinley homes: an open boiler casing with the heat exchanger exposed during a service

Fit The Heat Pump First And The MVHR Ducts Have To Squeeze Round It

Separate installers, each with their own design and start date, leave the second system fighting the first for space in the floors and cupboards.

Heat pump pipework, a hot water cylinder and MVHR ducts all want routes through the same parts of the house. If the heating goes in this year and the ventilation follows next year, the ducts take whatever space is left, and a unit fitted without a design behind it leaves some rooms short of air.

The question to put to any installer quoting your heat pump:

  • “Can it be designed alongside a heat pump we’re planning?”

With us the answer is yes. One survey measures heat loss, how big each room is and the power each room has, and both systems come from those numbers.

MVHR In Chinley, Planned With The Heating From One Survey

The heat loss figure from your heat pump survey goes straight into the ventilation design, so we measure the house once.

  • One survey covering heat loss, room volumes and the power available in each room

  • Duct routes drawn before the heating pipework, on the same set of drawings

  • Mitsubishi MVHR, chosen to match the house and how much heat it loses

  • The survey included in a fixed quote, and our 2-year guarantee on the install next to Mitsubishi’s warranty on the unit

MVHR installation for Chinley homes: a white Mitsubishi Electric Lossnay MVHR unit on a raised timber platform in a boarded loft, seen from the loft hatch, with four insulated ducts taped onto its top spigots, two foil ducts running to round terminals on the stone gable and two grey ducts feeding plenums whose radial ducts drop under the loft insulation, powered from a switched fused spur on the post

The Air Loop That Runs Beside Your New Heating

Scroll the four stages of the loop as it runs in a Chinley house, ending where our design starts: the numbers from the heating survey.

  1. Stale Air Leaves The Wet Rooms

    Damp air is pulled out of bathrooms and kitchens and carried outside.

    • Extract Valve
    • Extract Duct
    • Exhaust Duct
    • Exhaust Terminal
    • Stale Air
  2. Fresh Air Comes Back Filtered

    Outside air comes in through the filters and is supplied to the rooms you live in.

    • Intake Terminal
    • Intake Duct
    • Supply Duct
    • Supply Valve
    • Fresh Air
  3. The Core Keeps The Warmth

    Both streams pass through the heat exchanger, so most of the warmth stays inside.

    • Heat Exchanger Core
    • Fresh Air Filter
    • Extract Filter
    • Supply Fan
    • Extract Fan
  4. Sized From The Heating Survey

    Ductwork and airflow are sized from the numbers used for your heating, so nothing is measured twice.

    • Unit
    • End Panel
    • Lid
    • Controller

Inside A Chinley MVHR Installation, Survey To Handover

One price in writing covers six stages, and the people who draw the design are the people who fit it.

The quote sets them out in the order they happen.

  1. The Enquiry

    Tell us about the house, the heating you have and the heating you’re planning, and you hear from our office within one working day.

    MVHR installation for Chinley homes: step 1, the form and a short visit
  2. One Survey For Both

    Our lead engineer measures heat loss, room volumes and the power in each room, the figures both systems need.

    MVHR installation for Chinley homes: step 2, a system filter as standard
  3. Ducts Drawn First

    The ventilation routes go onto the drawings before the heating pipework, so neither has to dodge the other.

    MVHR installation for Chinley homes: step 3, a fixed quote
  4. A Price You Can Hold Us To

    The unit and the price in writing before anything is ordered, with the mess agreed up front and the dates set against the heating work.

    MVHR installation for Chinley homes: step 4, balanced radiators
  5. Installed By The Design Team

    Our team runs the ductwork and fixes the unit in the spot the design chose. Ventilation in an existing house takes three to four weeks, and a heat pump anything from a week to a month, depending on the size of the house.

    MVHR installation for Chinley homes: step 5, CO alarm and safety tests
  6. Commissioned And Explained

    Airflow at every valve measured against the design, the controls explained in the house, and reminders booked for the checks.

    MVHR installation for Chinley homes: step 1, sizing to your house

Mitsubishi MVHR, sized from the same numbers as your heat pump.

MVHR installation for Chinley homes: step 1, the form and a short visit MVHR installation for Chinley homes: step 2, a system filter as standard MVHR installation for Chinley homes: step 3, a fixed quote MVHR installation for Chinley homes: step 4, balanced radiators MVHR installation for Chinley homes: step 5, CO alarm and safety tests MVHR installation for Chinley homes: step 1, sizing to your house
MVHR installation for Chinley homes: boiler service collage: a boiler with its casing open and a flue analyser probe

An Oil Village On The Hillside, Planning Its Next Heating

At the 2021 Census about one household in ten across Blackbrook ward heated with oil or bottled gas alone, and the ward takes in Chinley, Buxworth and Brownside.

That is around four times the High Peak rate. In those houses a heat pump, new windows and insulation can land as one project, and bringing the ventilation into it lets the ducts, the pipework and the insulation be planned around each other.

  • Height and cold air. Chinley’s houses stand 180 to 230 metres above sea level. The colder the air coming in, the more warmth the core has to hand across to it, and that is the job heat recovery does.

  • The Park boundary. It splits Stubbins Lane down its centre line and follows part of Maynestone Road, so the survey checks which planning authority covers your house before we place a terminal.

  • Five conservation areas. The parish holds them at Wash, Leaden Knowl, Chapel Milton, Buxworth and Chinley itself, and inside them we check terminal positions at the design stage.

  • MVHR on its own. If no heating or fabric work is planned, we look at a standalone system case by case and tell you whether it makes sense.

Planned this way, you pay for one survey and one set of drawings, and neither system has to squeeze round the other.

Chinley Figures To Weigh Before The Survey

One from the census, one from the map and one from our quotes.

  • 1 in 10
    homes in the ward around Chinley heating only with oil or bottled gas (2021 Census), four times the High Peak share
  • 180 to 230 m
    the height of the village above sea level
  • 3 to 4
    weeks for the ventilation in an existing house, dated in your quote

A house moving off oil and an MVHR system sharing its survey both start from the same heat loss figure.

MVHR installation for Chinley homes: a fitted boiler with its casing on and a system filter beneath

“It’s just warm all the time”

Hear firsthand from our customer Fraser about how installing a heat pump has transformed his day to day living.

We’ve turned his cold 18th-century end terrace house into a comfortable, efficient home. No more waiting for the boiler to heat up the house in the morning.

Fraser’s property now sits at a consistent 19°C all year round.

Fraser, heat pump customer

Four Things Chinley Homeowners Weigh Up Before MVHR

MVHR installation for Chinley homes: a boiler pressure gauge and expansion vessel close up
  • Will it work with the oil boiler until the heat pump goes in?

    Yes. MVHR moves the air and whatever heats the house keeps it warm, so it runs with the oil boiler now and the heat pump later.

  • Will fresh air on a cold hillside make the rooms chilly?

    The incoming air picks up most of the warmth from the outgoing air in the core, and it reaches each room through a ducted valve sized for that room.

  • Will it help with condensation on the windows?

    The system takes steamy air from the kitchen and bathrooms without a break, so the moisture leaves with the windows shut.

  • How much does MVHR cost for a Chinley house?

    We can price it once the design survey has measured the house. The figure then goes into a fixed quote, and nothing is ordered before you have it.

MVHR In Chinley: Timing, Planning And The Heat Pump

Three to four weeks for a retrofit and one to two for a new build. If the heat pump goes in at the same time, your quote sets the dates for both and the disruption to expect.

The answer turns on which side of the National Park boundary your house sits. We check it, along with the parish’s conservation areas, and settle the duct routes, siting and any permission at the design stage.

No, a heat pump runs fine on its own. Once the house is well insulated and airtight, heat recovery leaves less heat for the heat pump to replace, and one design stops the ducts and pipes competing for space. Heat pump installation in Chinley deals with the heat pump itself, and the full renewables package adds solar and a battery to the same design.

Yes, both villages. Down the road, MVHR installation in Chapel-en-le-Frith covers the town, and the MVHR installation page sets out how we work.

Tell Us About Your Chinley Home

The heating you have, the heating you’re planning, and how to reach you. We plan the survey around both systems from there.

What Our Customers Say On Google